Learn more of the way Heat Pumps Work
  • chernomyrdinkuzmachernomyrdinkuzma April 2018
    Heat Pumps are devices who use small degrees of energy so that you can move heat derived from one of location to another. Usually you can use them to get heat from the air or perhaps the ground so that you can warm a building. They can also be turned around in order to cool a building. They work exactly the same way as air conditioning units do, other than they are able to perform the work of both a cloak conditioner plus a furnace. Therefore, when working with heat pumps there's no need to setup both air conditioning systems - just one system performs both jobs. Also, they are more efficient than furnaces simply because they merely transfer heat rather than burn fuels to really make it; but because an end result, they work better in moderate rather than extreme climates. For individuals in moderate climates, using pompe de caldura as opposed to furnaces and air conditioners can help to save considerable funds on utility bills.


    There are various types of heat pumps, but every one of them run on the main of warmth transfer, which means moving heat derived from one of spot to another as an alternative to burning fuel to produce it. As a result of second law of thermodynamics, heat naturally will flow coming from a place which has a high temperature to a single having a lower temperature. They'll use small quantities of energy to reverse that process, pulling heat from low temperature areas and moving it to warm areas - coming from a flame for example the ground or air into a heat sink such as a building. A typical sort of heat pump can be an air source one, which removes heat from air outside a structure and pumps it through coils filled with refrigerant towards the inside.

    Air source heat pumps AZ contain two fans, the refrigerator coils, a compressor as well as a reversing valve. One fan is utilized to get outside air on the refrigerator coils, which transfer the temperature inside where it's blown through the coils by a second fan and distributed over the building. The purpose of the reversing valve is to turnaround for the flow of refrigerant so the system operates backwards. As opposed to pumping heat within the building, it releases the warmth, just like an air conditioner does. Then a refrigerant absorbs heat within the pump and carries it outside where it can be released. Then this refrigerant cools down and flows back inside to consider more heat.

    Ground source heat pumps work exactly the same way as air source ones except they absorb the heat in the ground, or from your river beneath the ground, and then transfer heat indoors or the other way around when employed in reverse mode. An absorption heat pump AZ can be an air source unit that's powered by solar technology, propane, gas main, or geothermically heated water as an alternative to by electricity. The chief distinction between air source models and absorption pumps is the fact that instead of compressing the refrigerant, absorption ones absorb ammonia into water then the low power pump pressurizes it. The temperature source boils the ammonia through the water and also the process begins anew.

Добро пожаловать!

Похоже, что Вы здесь впервые. Если хотите поучаствовать, нажмите на одну из этих кнопок!

Войти Зарегистрироваться