Plasma Cutter factory
  • salink888salink888 April 12
    Product description:
    MOSFET inverter cutting machine
    1, High frequency arc striking
    2,Cutting speed is 1.8 times higher than flame cutting
    3,Recommended cutting thickness is 7mm, maximum cutting thickness is15mm
    4,Compressed air is required
    5,Over /under voltage protection, thermal protection, over
    Technical Parameters
    ModelLGK-40LGK-60CUT-100CUT-120
    Rated input voltage /frequencySingle Phase 220V土 15%Three Phases 380V±15% 50/60Hz
    Rated input capacity (KVA)6.09.015.225.7
    Rated input current (A)9.113.723.139
    Rated output voltage (V)96104120128
    Output current range (A)20-4020-6020-10020-120
    Output no load voltage (V)230260298345
    Rated duty cycle (%)60
    Air pressure (M p a)0.45-0.55
    Max cutting thickness(mm)8153035
    Best cutting thickness(mm)1〜51-81-121-18
    Gas flow(L/min)250
    Arc methodHigh frequency
    Enclosure protection class1P21S
    Insulation gradeF
    Exterior size L x W x H (mm)450x270x335675x615x452690x370x580705x385x595
    Weight(kg)92536.543.5Plasma Cutter factory
    website:http://www.sz-manufacturer.com/welding-machine/plasma-cutter/.

Добро пожаловать!

Похоже, что Вы здесь впервые. Если хотите поучаствовать, нажмите на одну из этих кнопок!

Войти Зарегистрироваться