iPhone Screen Replacement - Step by Step
  • pyzhovandrejpyzhovandrej March 10
    One of the most complex repairs with an iPhone can be a screen replacement repair, prior to deciding to attempt this repair make sure you have adequate time to complete the work, this will let you clear working space for the iPhone as well as the replacement screen to sit in while taking care of them.

    For any replacement screen do the repair is essential to totally disassemble the iPhone, well, i would suggest that just before commencing the repair obtain a few small items of paper to be able to label your parts, and that i particular the cause from the screws. Label them the following; Metal Back Screws, aluminum back case, and motherboard - lay them on the workspace on this order having a small space between them for your other iPhone components and replacement screen to lie in.

    image

    The various tools and equipment needed for this repair are; an instance opener, a little Phillips screwdriver, a paperclip to eject the SIM tray as well as the iPhone replacement screen, once you've those to hand and also the paper labels arranged. Make sure to have clean hands prior to starting the iPhone screen repair in Reading.

    Firstly remove the SIM tray - try this by inserting the paper clip in the hole about the topside of the iPhone near the power button, if the clip is inserted, the SIM tray should eject. Next, make use of the case opener to get rid of the plastic back from the iPhone. Lay those two components beside the paper labels, after you have fitted the replacement screen in your iPhone you will need to reverse the order of these instructions to reassemble the iPhone. For this reason, I recommend placing them furthest of your stuff next to the aluminum paper label.

    The next step is to remove both small screws on each side with the back securing the metal casing, and another screw located top, middle of in places you removed the plastic back - placing these about the paper label. After you have completed this, go ahead and take case opener again and carefully run it along either side with the iPhone to loosen the trunk out of the frame - you will see the metal back is secured with a wire ribbon, carefully detach this in the main portion of the iPhone, not the metal back end.

    The next thing within the screen replacement repair needs caution - it really is needed to eliminate the iPhone antenna cable, secured by glue in three positions, carefully pry it loose with the glue spots. After this, you need to remove 10 screws from round the sides of the iPhone, and set them about the paper label 'Outside Case' - after this eliminate the 3 screws securing the motherboard. You should remove the motherboard at the same time since the battery since they are soldered together, after you have carried this out it is possible to carefully detach the rest of the iPhone frame.

    The next thing is to eliminate the Vast screen so that you can fit the replacement screen - this really is probably the most difficult section of the repair and requirements being done with extreme caution. Loosen the three clips about the sides from the screen and slowly begin taking out the LCD, you will notice some wires are intertwined in to the Iphone - carefully guide them from the frame and, they are going to slide through.

    After you have completed this, go ahead and take iPhone screen replacement and insert it to the phone, carefully trace your steps to ensure no errors are made when assembling the iPhone to its original state.

Добро пожаловать!

Похоже, что Вы здесь впервые. Если хотите поучаствовать, нажмите на одну из этих кнопок!

Войти Зарегистрироваться