Different Kinds of Stained Glass Tools
  • vagzhanova1974vagzhanova1974 March 13
    There are various tools associated when controling stained glasses. These power tools ease the task from the glass especially soldering, cutting, marking and smothering the glass. Some of the Mosaic Supplies used are as highlighted below.

    In the workshop, glass must be cut. Probably the most commonly used tools are glass cutters which can be manufactured from a wheel delayed by bearings. The wheels can be produced of any hard materials carbide, steel or rather tungsten. Although all glass cutters are unique, merely the handles tend to make them not the same as each other.


    Other stained glass tools include the soldering iron and grinder. A soldering iron is really a tool using a temperature control knob which often regulates the temperature with all the it. A grinder is definitely an electric tool found in glassware industry to make the edges with the glass smooth. Aside from the grinder, other essential tools needed for the work of smoothing the sides of glass are worktable or board and also the brushes.

    Another key stained glass tool required for the job may be the grozing pliers. Its look likes the ordinary pliers though its main purpose is always to cut the lead. The grozing pliers is preferred to the ordinary pliers because the pressure it relates to the glass much less expensive than that applied by ordinary pliers. If the pressure is too much, it results in the glass cracking. Grozing pliers are somewhat unaffordable, so a particular standard knife referred to as putty knife may be used in its place. Before using the standard knife, you should modify the blade to check thin and sharp.

Добро пожаловать!

Похоже, что Вы здесь впервые. Если хотите поучаствовать, нажмите на одну из этих кнопок!

Войти Зарегистрироваться